Responsible for tasks such as performing cosmetic restoration, peening, and installation. Other tasks consist of setting up and operating equipment including mills, saws, polishers, grinders, and using a variety of hand tools.

Required Education/Experience
High school diploma or GED certificate

Pay (not including Night Shift Bonus)
$24.2104/hour starting
$25.2810/hour after successful completion of training and introductory probation
Opportunities to earn up to $28.5034/hour

Benefits

Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. 

General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

GE Bangor Shifts (not all shifts are available for all openings)

4 – 10 hour days Monday-Thursday

• Day Shift (5AM-3:30PM)
• Night Shift (3:30PM-2AM)

3 – 12 hour days Friday-Sunday

• Day Shift (6AM-6:30PM)
• Night Shift (6PM-6:30AM)

Career Development Opportunities
Manual mill and drill machining
Portable CMM arm (FARO)
Blade carrier assembly
CMM/Harmonics
NC Machining
…and more

Responsible for performing rotor assembly and dynamic balance operation functions as needed. Performs all hand and machine operations required in the assembly of rotors, wheels and intermediates.

Required Education/Experience

• 2-year post-secondary degree in Machine Tool Technology, or
• 1 year of machining (mill, turn or drill) experience, or
• 1 year large mechanical assembly experience, or
• Graduate of any recognized machinist or tool maker course (e.g. tech school, industrial or Armed Forces program)

Pay (not including Night Shift Bonus)
$27.2632/hour starting
$28.5034/hour after successful completion of training and introductory probation

Benefits

Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. 

General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

GE Bangor Shifts (not all shifts are available for all openings) 
4  10-hour days; Monday-Thursday

• Day Shift (5AM-3:30PM)
• Night Shift (3:30PM-2AM)

3  12-hour days; Friday - Sunday

• Day Shift (6AM-6:30PM)
• Night Shift (6PM-6:30AM)

Career Development Opportunities
J-Seal Assembly
Auto Peen
Remills
Balance
Lathe and Grinder
NC Machining
…and more

Responsible for setting up and operating saws, milling machines, NC machining centers and coordinating measuring machines (CMMs) as required.

Required Education/Experience

• Graduate of any recognized machinist or tool maker course (e.g., tech school, industrial or Armed Forces program), OR
• Minimum of one year experience in set up and operation of Computerized Numerical Control (CNC) multi-access machining

All candidates must successfully pass a written machinist assessment. 

Preferred Education/Experience

• Two-year post-secondary degree in Machine Tool Technology
• Two years manual machining (mill, turn or drill) experience

Pay (not including Night Shift Bonus)
$27.2632-28.5034 /hour starting (entry level machinist)
$28.5034-29.2772 /hour after successful completion of training and introductory probation

Benefits

Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. 

General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

GE Bangor Shifts (not all shifts are available for all openings)

• 4 – 10 hour days Monday-Thursday
  • Day Shift (5AM-3:30PM)
  • Night Shift (3:30PM-2AM)
• 3 – 12 hour days Friday-Sunday
  • Day Shift (6AM-6:30PM)
  • Night Shift (6PM-6:30AM)

Career Development Opportunities

NC and CMM programming
Vertical Turret Lathe (VTL)
Mill and drill/Horizontal Boring Machine (HBM)
Rotor Lathe
Rotor Milling
…and more

Responsible for upgrading and repairing in-process, finished, and Repair & Return parts and the assembly and welding of Fillet Fab, Sub Arc, Mig Fillet Diaphragms, and nozzle plates.

Required Education/Experience
Two-year post-secondary degree in Welding Technology or one-year post-secondary certificate welding school (equivalent 6 credit hours) and one year welding experience (i.e. SAW, GTAW, SMAW, FCAW, GMAW) in a manufacturing or industrial environment or two years welding experience (i.e. SAW, GTAW, SMAW, FCAW, GMAW) in a manufacturing or industrial environment

Pay (not including Night Shift Bonus)
$28.5034/hour starting
$30.9096/hour after successful completion of training
Opportunities to earn up to $32.5526/hour

Benefits

Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. 

General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

GE Bangor Shifts (not all shifts are available for all openings)

4 10-hour days Monday-Thursday

• Day Shift (5AM-3:30PM)
• Night Shift (3:30PM-2AM)

3 12-hour days Friday-Sunday

• Day Shift (6AM-6:30PM)
• Night Shift (6PM-6:30AM)

Career Development Opportunities
Repair and Return majors
NDT LII (UT)
NDT LIII (PT, MT, VT or UT)
…and more

Responsible for performing mechanical, hydraulic, pneumatic, electrical, electronic, CNC and PLC repairs and troubleshooting on assigned equipment and facilities to required standards and codes.

Required Education/Experience
•  High School Diploma/GED AND a combination of 2 years education and/or Maintenance experience(including mechanical, electrical, and programable logic controller experience, and troubleshooting) in an industrial/manufacturing environment.

• Must be able to travel between Griffin Road and Maine Avenue locations as needed [drive company vehicle]; must maintain a valid driver's license

Preferred Education/Experience
• 2-year post-secondary degree in Electrical Power Technology or equivalent content degree (forexample, Industrial Electronic Technology)

• 5 years of maintenance experience (including mechanical, electrical and programmable logic controller experience and troubleshooting) in an industrial/manufacturing environment.

• Current/active Journeyman/Master Electrician License

Pay (not including Night Shift Bonus)

$35.4492/hour starting
$37.0226-40.9626/hour after progression to full job rate.

Benefits

Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. 

General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

GE Bangor Shifts (not all shifts are available for all openings)

4 – 10 hour days Monday-Thursday

• Day Shift (5AM-3:30PM)
• Night Shift (3:30PM-2AM)

3 – 12 hour days Friday-Sunday

• Day Shift (6AM-6:30PM)
• Night Shift (6PM-6:30AM)

Overnight Shift

• 10 PM Sunday-7AM Monday
• 12-7 AM Tuesday-Friday

Internship in machining or maintenance.

Required Education/Experience
Machinist Intern 1 (Part-Time): Currently enrolled in a 375-hour Precision Machining Technology Program. Opportunities available for on-the-job training in partnership with KVCC (10-week program with guaranteed interview after successfully completing coursework)

Machinist Intern 2: Currently enrolled inany recognized machinist or tool maker course (e.g. tech school, industrial or Armed Forces program).

Maintenance Intern 1 (Part-Time): Enrolled in UTC.  Completed one year of program.

Maintenance Intern 2: Electrical Power Technology or equivalent content degree (e.g. Industrial Electronic Technology). Completed first year of program.

Pay (not including Night Shift Bonus)
Machinist Intern 1: $19.000/hour starting
Potential for direct, full-time hire after program completion

Maintenance Intern 1: $20.000/hour starting
Potential for direct, full-time hire after program completion

Machinist Intern 2: $20.000/hour starting
If enrolled in two-year post-secondary program, potential for tuition reimbursement for second year of school
Potential for direct, full-time hire after graduation

Maintenance Intern 2: $22.840/hour starting
Potential for tuition reimbursement for second year of school
Potential for direct, full-time hire after graduation

GE Bangor Shifts (not all shifts are available for all openings)
Machinist Intern 1 & Maintenance Intern 1:
4  10-hour days; Monday-Thursday
Day Shift opportunities (5 a.m.-3:30 p.m.)

Machinist Intern 2 & Maintenance Intern 2:

4  10-hour days Monday-Thursday

• Day Shift (5AM-3:30PM)
• Night Shift (3:30PM-2AM)

3  12-hour days Friday-Sunday

• Day Shift (6AM-6:30PM)
• Night Shift (6PM-6:30AM)

Contact GE Bangor Human Resources at GEBangor.Careers@ge.com for more information about scheduling a class tour or high school job shadow.

Class Tours
GE Bangor invites students, faculty and staff of Career and Technical Education Centers (CTEs), High Schools and Community Colleges to tour our facility.

High School Job Shadows
The GE Bangor High School Job Shadow Program allows high school students to learn more about GE Bangor through tours and job shadowing/observation. Our goal is to educate, inspire, and engage high school students who have interests in manufacturing, engineering and/or technology. Job Shadowing will be offered from 7-11 a.m. Monday-Friday. Not all requests for Job Shadowing can be accommodated.

This Hourly Leadership position will assist with CAD/CAM duties to support NC Machines throughout the GE Bangor facility.

Required Duties:

• Perform NC inputs (e.g. APT, Macro B, PC Mill, & others as required)
• Create new Vericut sessions & check programs
• Create programs with CAM software (e.g. Mastercam, Espree, Turbosoft, etc.)
• Fix programs (break/fix) independently when issues occur in the shop
• Assist in process team meetings
• Assist in quality (QOPF) form creation & improvement
• Assist in Workstation Book creation & updates
• Drive process improvements and participate in Lean Action Work Outs
• Run machines as assigned (if trained/qualified)
• Perform other duties as assigned 

In addition to the above, the employee must, after normal training, be able to: 

• Communicate effectively and work well with others 
• Maintain accurate written and computer records 
• Read and understand engineering drawings and specifications 

Required Education/Experience

• 2-year post-secondary degree in Machine Tool Technology, or 
• Accredited post-secondary certificate in CNC Machining and 1 year of CNC machining experience, or 
• 2 years of CNC  machining experience
  

Desired Skills/Qualifications

• 5-axis machining experience
• Prior experience with CAD/CAM and/or NC Programming
• Basic computer skills, math skills, machinist knowledge (e.g. blueprint reading, machine code, etc.)

Pay (not including Night Shift Bonus)

• $32.1392/hour starting
• $32.5526/hour after successful completion of training and introductory probation

Benefits

Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. 

General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

GE Bangor Shifts (not all shifts are available for all openings)

• 4 - 10 hour days Monday-Thursday
  • Day Shift (5AM-3:30PM)
  • Night Shift (3:30PM-2AM)
• 3 - 12 hour days Friday-Sunday
  • Day Shift (6AM-6:30PM)
  • Night Shift (6PM-6:30AM)

Career Development Opportunities

Manufacturing Engineer